Free Estimates & Fast Turnarounds
When you bring your bike to us for service or customization, you can expect a thorough and honest assessment whether you need a small adjustment, regular maintenance, or a complete overhaul.
Small deposit required for estimates stored at shop, service work is charged at time of drop-off so that you’re ready to hit the road when you pick up your bike!
Check frame and moving parts for safety and functionality, light adjustment of brakes and gears, light truing of front and back wheel, tire top off and chain lube.
Disassemble drive train and clean in solvent, clean bike, clean and inspect all bearings surfaces and repack with Phil Wood grease, full wheel true, full adjustment of brakes and gears, lubricate cables and pivot points on brakes, align drop-outs, check and align fork and frame, grease stem, seatpost and pedal thread, top off tires and tension check all nuts and bolts to factory spec, and test ride.
Clean bike, adjust bottom bracket, headset, and hubs, full wheel truing, adjust gears and brakes, lube pivot points and cables on brakes, align drop-outs, check frame for alignment, grease seat post, stem and pedal threads, tighten all nuts and bolts, top off tires and test ride.
Single Speed Tune-Up
Identical to regular tune-up minus the gear adjustment.
Remove drive train and clean in solvent, clean bike, adjust bottom bracket, hubs, and headset, full wheel truing, dial in gears and brakes, lube pivot points on brakes and cables, align drop-outs, check frame for alignment, grease seat post, stem and pedal threads, tighten all nuts and bolts, polish frame, top off tires and test ride.
Single Speed Overhaul
Identical to “The overhaul” minus the gear adjustment.
Prices are for customer estimation, vary, and are subject to change. Prices are for labor only unless otherwise noted.
Please bring your bike or project ideas in to the shop for a free consultation and estimate from one of our mechanics. Thank You.
Most Flat Repair – $14 (includes tube)
Most Simple Installation – $8-$10
Hourly Flat Labor Rate – $60
$6-8 per derailleur
Replace Gear Cable
$18 (includes gear adjustment, may require new grips or tape depending on condition)
Replace or Repair Chain
Replace cog set
Drive chain clean
$30 (includes gear adjustment)
$6-8 per brake
Install new cable
Adjust or install brake pads
$6-8 additional per brake
Replace brake housing
$1 per foot of housing, $6 additional per brake
Install new brake calipers
$15 per brake
Install new brakes and levers
$20 per brake
Install cross top levers
$25 (includes pad adjustment and cable tension)
Hydraulic Disk Brake Bleed
$25 per lever/side (DOT or Mineral Oil) 1-3 day turnaround depending on shop service volume.
Tube or Tire Change
Front or Rear wheel
3 Speed wheel or Coaster Brake
Nexus internal hub, e-hub, or other internal hub brand
Overhaul front hub
Overhaul rear hub
Overhaul coaster brake
Overhaul internal hub (any speed)
Install clip-on fenders
Install full fenders
Install steel fenders
Install light or lock bracket
Install bar ends
Install and connect dynamo lights
$15-20 per light
Install cycling computer
Adjust bottom bracket
$10 (cranks taken off)
Overhaul bottom bracket
Install or replace sealed bottom bracket
Overhaul or install headset
$30 (includes headset overhaul and brake adjust)
$6 per set
Straighten derailleur hanger
Wrap drop bars
Remove and install grips
Professionally Laced, Trued, and Tensioned
$60 + Parts
Crank arm removal and replacement
$6 per side
Replace/Remove chain rings
Bike Box Services
Unboxing bike & Re-Assembly
$45 provided no additional repairs are done to the bike (we no longer offer boxing service)
Detailed Parts Build
Let us work with you to ensure that that frame is built up to spec, and that everything is measured correctly before ordering.